BS EN 10029 1991
|
ID： |
0EEB1549114245BE9B562BAC4715F449 |
|
文件大小(MB)： |
0.14 |
|
页数： |
16 |
|
文件格式： |
|
|
日期： |
2013-6-1 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10029:1991,Specification for,Tolerances on,dimensions, shape and,mass for hot rolled,steel plates 3 mm thick,or above,This European Standard EN 10029:1991 has the status of a,British Standard,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Wed Aug 09 23:54:30 BST 2006, Uncontrolled Copy, (c) BSI,BS EN 10029:1991,This British Standard was,published under the authority,of the Standards Board and,comes into effect on,31 October 1991,. BSI 11-1998,The following BSI references,relate to the work on this,standard:,Committee reference ISM/12,Draft for comment 89/42222 DC,ISBN 0 580 20144 9,Cooperating organizations,The European Committee for Standardization, under whose supervision this,European Standard was prepared, comprises the national standards,organizations of the following countries.,Austria Oesterreichisches Normungsinstitut,Belgium Institut belge de normalisation,Denmark Dansk Standardiseringsraad,Finland Suomen Standardisoimisliito, r.y.,France Association fran鏰ise de normalisation,Germany Deutsches Institut für Normung e.V.,Greece Hellenic Organization for Standardization,Iceland Technological Institute of Iceland,Ireland National Standards Authority of Ireland,Italy Ente Nazionale Italiano di Unificazione,Luxembourg Inspection du Travail et des Mines,Netherlands Nederlands Normalisatie-instituut,Norway Norges Standardiseringsforbund,Portugal Instituto Portuguès da Qualidade,Spain Asociación Espa駉la de Normalización y Certificación,Sweden Standardiseringskommissionen i Sverige,Switzerland Association suisse de normalisation,United Kingdom British Standards Institution,Amendments issued since publication,Amd. No. Date Comments,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Wed Aug 09 23:54:30 BST 2006, Uncontrolled Copy, (c) BSI,BS EN 10029:1991,. BSI 11-1998 i,Contents,Page,Cooperating organizations Inside front cover,National foreword ii,Foreword 2,Text of EN 10029 3,National appendix NA (informative) Inside back cover,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Wed Aug 09 23:54:30 BST 2006, Uncontrolled Copy, (c) BSI,BS EN 10029:1991,ii . BSI 11-1998,National foreword,This British Standard has been prepared under the direction of the Iron and Steel,Standards Policy Committee and is the English language version of EN 10029,“Hot rolled steel plates 3 mm thick or above – Tolerances on dimensions, shape,and mass”.,It supersedes the technical content of clause 14 of BS 4360:1990, clause 18 of,BS 1501-1:1980, clause 8 of BS 1501-2:1988 and clause 14 of BS 1501-3:1990.,Amendments to BS 4360:1990, BS 1501-1:1980, BS 1501-2:1988,and BS 1501-3:1990 will be published simultaneously with this standard.,A British Standard does not purport to include all the necessary provisions of a,contract. Users of British Standards are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Summary of pages,This document comprises a front cover, an inside front cover, pages i and ii,the EN title page, pages 2 to 10, an inside back cover and a back cover.,This standard has been updated (see copyright date) and may have had,amendments incorporated. This will be indicated in the amendment table on,the inside front cover.,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Wed Aug 09 23:54:30 BST 2006, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10029,April 1991,UDC 669.14-122.4-41:621.753.14:620.1,Descriptors: Iron and steel products, hot rolled products, metal plates, alloy steel, unalloyed steels, stainless steels, designation,dimensional tolerances, form tolerances, weight tolerances,English version,Hot rolled steel plates 3 mm thick or above —,Tolerances on dimensions, shape and mass,T鬺es en acier laminées à chaud, d’épaisseur,égale ou supérieure à 3 mm — Tolérances sur,les dimensions, la forme et la masse,Warmgewalztes Stahlblech von 3 mm Dicke,an — Grenzabmabe, Formtoleranzen, zul鋝sige,Gewichtsabweichungen,This European Standard was approved by CEN on 17 April 1991. CEN,members are bound to comply with the CEN/CENELEC Internal Regulations,which stipulate the conditions for giving this European Standard the status of,a national standard without any alteration.,Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any,CEN member.,This European Standard exists in three official versions (English, French,German). A version in any other language made by translat……
……